AODE Precise Equipment Co.,Ltd.
The operation of a water chiller is a continuous thermodynamic cycle designed to extract heat from a process and reject it into the environment. To understand how a water chiller works, it is best to view it as a four-stage journey of a refrigerant as it changes states between liquid and gas.
The cycle begins here. The "process water" (the water that has picked up heat from your machinery or building) enters the evaporator. Inside, it circulates around tubes filled with a cold, low-pressure liquid refrigerant.
The Science: The refrigerant has a much lower boiling point than water. As the warm process water flows past, the refrigerant absorbs the heat.
The Result: The process water is now "chilled" and pumped back to the equipment. Meanwhile, the refrigerant evaporates and turns into a low-pressure gas.
The low-pressure gas enters the compressor, which is the "heart" of the chiller system.
The Science: The compressor mechanically squeezes the gas into a very small space. According to thermodynamic laws, increasing the pressure of a gas also dramatically increases its temperature.
The Result: The refrigerant leaves the compressor as a high-pressure, high-temperature superheated vapor.
Now that the refrigerant is hotter than the outside air or cooling water, it enters the condenser to get rid of that heat.
Air-Cooled Chiller: High-speed fans blow ambient air across the condenser coils to pull the heat away.
Water-Cooled Chiller: A separate loop of water (usually from a cooling tower) flows through the condenser to absorb the heat.
The Result: As the refrigerant loses heat, it undergoes a phase change back into a high-pressure liquid.
The final step is to prepare the refrigerant to absorb heat again. The high-pressure liquid travels to the expansion valve.
The Science: This valve acts as a restrictive nozzle. As the liquid passes through, the pressure drops instantly. This "flash evaporation" causes the temperature of the refrigerant to plummet.
The Result: The refrigerant returns to a cold, low-pressure liquid/gas mixture, ready to enter the evaporator and start the cycle over.
